Insert, tapered sealing EN1254, red brass, 4381
EN1254 gunmetal 4381
FITT-INRTPC-EN1254-ILE-RB-18X3/4IN-4381
Register now and access more than 125,000 products
- For universal use in various areas of application, e.g. shipbuilding and the mechanical engineering industry
- Meets the requirements of the various German Technical and Scientific Association for Gas and Water (DVGW) regulations
- Also approved by other certification institutes such as KIWA, BSI Kitemark, British Gas, Gaz de France, NF, SVGW
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight %
Fitness for drinking water is confirmed by the DVGW type examination certificates DV-7411AO2008 (copper fittings) and DV-7401AS2290 (gunmetal adapter fittings). This is also confirmed by the Austrian conformity registration certificate no. R-15.2.3-20-17025 for the 4000 series and R-15.2.3-20-17026 for the 5000 series.
Datasheets(X)
- Drinking water installations DIN EN 806 and DIN 1988
- Natural gas installations DIN EN 1775 and DVGW G 600 (TRGI)
- LPG installations, technical rules for LPG (TRF)
- Heating oil supply systems DIN 4755 (TRÖ)
- Hot water heating DIN EN 12828
- Local and district heating lines DIN 4747
- Thermal solar collectors
- Water-based room cooling systems
- Refrigeration equipment (ACR)
- Compressed air
- Equipment for the distribution of technical and medical gases
- Rainwater harvesting systems DIN 1989
- Fire-extinguishing pipes "wet" DIN 14462
- Sprinkler systems "wet" VdS CEA 4001
- Industrial and process water
- Wastewater pumping stations
 | |
Nominal diameter | 18 mm |
Nominal diameter 2 | 3/4 in |
Length (a) | 22 mm |
Connection thread | G 3/4 inch |
Connection type | 1. connection internal soldering |
Material | Red bronze - gunmetal |
Surface | Plain |
Last viewed
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)
Work dungarees Women's Stretch X
Hexagonal bolt with shank
Countersunk head screw with nib and nut
Spacers For aluminium standing ladders with steps, flanged
Countersunk tapping screw, shape C with Z recessed head DIN 7982, A2 stainless steel, PZ drive
HSS Multi Performance TiAIN stepped twist drill bit
HSS WN centre drill bit For HW hole saws (flat cut) and MBS HW cylinder saws
TWIST FINE 2-in-1 mechanical pencil and deep-hole marker set
Duo chamfer plane