Installation box, bath tub shower tray, surface-mounted, masonry
Install. box bth tub/shwr srf. mount fr. selec. MN
IB-BATHTUB/SHWR-MN-CWTR/HWTR-DN20-LWR
Register now and access more than 125,000 products
Free choice of pipe system. Completely pre-installed box for rapid mounting and problem-free pipe feedthroughs.
Special plaster base board guarantees premium quality in the event of pressure or temperature fluctuations
Easy height adjustment
Based on a marking in the middle of the wall panel
Pre-insulation
Quick and simple additional insulation possible
Huge time savings
- Pipe feedthroughs are pre-mounted without tension and ready for connection
- The enlarged and elegant wall panels increase the accuracy of the wall connection
No extension required
- Drywall can be sealed immediately
Stable subsurface
The plaster and tile base boards guarantee a permanently stable subsurface.
Optimum insulation
The fittings are protected thanks to the millimetre-precise outlet guides
Please state the required pipe system when ordering.
The following information is required:
Pipe manufacturer: e.g. Viega
Pipe type: e.g. Raxofix
Your order cannot be processed without this information.
Custom production. Extended delivery times up to max. 7 working days.
These products cannot be exchanged or returned. Each order is manufactured individually to the customer's specifications
Datasheets(X)
For sanitary installations in masonry
1. The corresponding recesses must be left in the masonry using the installation box supplied or the installation recommendation.
2. The box must then be fixed in place using the assembly jig and foam-filled with 1C assembly foam.
3. Leave to harden according to the instructions supplied with the foam and remove the assembly jig.
 | |
Box width | 230 mm |
Box height | 145 mm |
Box depth | 50 mm |
Water inlet | Cold water, Warm water |
DN tube connection | Nominal diameter 20 from below |
Distance centre of pipe to centre of pipe | 153 mm |
Pipe length | 1500 mm |
Material of box | Closed-cell polyurethane foam |
Product weight (per item) | 380.000 g |
Manufacturer of pipe system | Freely selectable |
Colour | Red |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Protective glove, knitted and coated
Hexagon head bolt With thread up to head, structural bolting assembly, DIN EN 15048-1
Jacket Planam Tristep
Vehicle dry abrasive paper strip RED PERFECT®
Hexagonal bolt with flange DIN 6921, A2-70 stainless steel, plain
System workbench 1500 mm with 2 fixed workbench feet and drawer wall-mounted cabinet 8.6
T-piece, reduced with solder connection EN1254, copper, 5130R
Hexagon nut ISO 4032, steel 5-2, plain, for pressure container construction
Slotted cheese head DIN 84, steel 4.8, plain
Pan head screw with H cross recess DIN 7985, steel 4.8, chrome-plated (CR)