Installation box shower tray flush-mounted mixer masonry
Install. box shower conceal mixer free select MN
IB-SHWR-MN-L-DN20-HANSABLUEBOXBARR
Register now and access more than 125,000 products
Special plaster base board guarantees premium quality in the event of pressure or temperature fluctuations
Easy height adjustment
Based on a marking in the middle of the wall panel
Pre-insulation
Quick and simple additional insulation possible
Huge time savings
- Pipe feedthroughs are pre-mounted without tension and ready for connection
- The enlarged and elegant wall panels increase the accuracy of the wall connection
No extension required
- Drywall can be sealed immediately
Stable subsurface
The plaster and tile base boards guarantee a permanently stable subsurface
Optimum insulation
The fittings are protected thanks to the millimetre-precise outlet guides
Please state the required pipe system when ordering.
The following information is required:
Pipe manufacturer: e.g. Viega
Pipe type: e.g. Raxofix
Your order cannot be processed without this information.
Custom production. Extended delivery times up to max. 7 working days.
These products cannot be exchanged or returned. Each order is manufactured individually to the customer's specifications
Datasheets(X)
For sanitary installations in masonry
1. The corresponding recesses must be left in the masonry using the installation box supplied or the installation recommendation.
2. The box must then be fixed in place using the assembly jig and foam-filled with 1C assembly foam.
3. Leave to harden according to the instructions supplied with the foam and remove the assembly jig.
 | |
Box width | 365 mm |
Box height | 330 mm |
Box depth | 70 mm |
DN tube connection | DN.. 20.. |
Pipe length | 1500 mm |
Material of box | Closed-cell polyurethane foam |
Material of pipe | Polyethylene polymerised |
Colour | Red |
Flush-mount body | HANSA Bluebox with stop cock |
Position of discharge tube | Left |
Head shower | With heat shower |
Product weight (per item) | 3480 g |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Countersunk tapping screw shape C with H recessed head DIN 7982, A4 stainless steel, plain
DIN 976-1 steel 8.8 zinc plated shape B
ORSY®BULL partition elements For dividing ORSY®BULL top loader boxes according to individual requirements
Hexagonal bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc flake, silver (ZFSHL)
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive
Jacket Planam Highline
Self-tapping screws, flat head assortment 2058 pieces in system case 4.4.1. DIN 7500-1
Pan head tapping screw, shape F with recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), round head, PH drive