Installation box, shut-off valve, masonry
Install. box shut-off valve freely selectable MN
IB-SHTOFFVLVE-MN-1/2IN-DB
Register now and access more than 125,000 products
Special plaster base board guarantees premium quality in the event of pressure or temperature fluctuations
Easy height adjustment
Based on a marking in the middle of the wall panel
Pre-insulation
Quick and simple additional insulation possible
Huge time savings
- Pipe feedthroughs are pre-mounted without tension and ready for connection
- The enlarged and elegant wall panels increase the accuracy of the wall connection
No extension required
- Drywall can be sealed immediately
Stable subsurface
The plaster and tile base boards guarantee a permanently stable subsurface
Optimum insulation
The fittings are protected thanks to the millimetre-precise outlet guides
Please state the desired pipe system when ordering.
The following information is required:
Pipe manufacturer: e.g. Viega
Pipe type: e.g. Raxofix
Your order cannot be processed without this information.
Custom production. Extended delivery times up to max. 7 working days.
These products cannot be exchanged or returned. Each order is manufactured individually to the customer's specifications
Datasheets(X)
For sanitary installations in masonry
1. The corresponding recesses must be left in the masonry using the installation box supplied or the installation recommendation.
2. The box must then be fixed in place using the assembly jig and foam-filled with 1C assembly foam.
3. Leave to harden according to the instructions supplied with the foam and remove the assembly jig.
 | |
Box width | 350 mm |
Box height | 180 mm |
Box depth | 70 mm |
Pipe length | 500 mm |
DN tube connection | Nominal diameter 20 from below |
Manufacturer of valve | Kludi |
Shut-off valve | 1/2 inch |
Number of shut-off valve | 2 PCS |
Material of box | Closed-cell polyurethane foam |
Product weight (per item) | 1420 g |
Manufacturer of pipe system | Freely selectable |
Colour | Red |
Last viewed
Weatherproof trousers
Timber reviver B
Stud with threaded end ≈ 2d
ASSY® 4 CSMP ZiNi timber screw Steel zinc-nickel partial thread countersunk milling pocket head
Square spindle 8 mm with eccentric drill hole
Round head screw with square neck DIN 603, steel 4.8, zinc-plated, blue passivated (A2K)
Stud screw A2 stainless steel
Safety boots, S3
Grooved taper pin
T-piece, reduced with solder connection EN1254, copper, 5130R