Installation box, standard washbasin, masonry
Install. box st. washba. free slct. MRW 150 mm
IB-WT-MN-CWTR/HWTR150-DN16-LWR-WWTR40
Register now and access more than 125,000 products
Free choice of pipe system. Completely pre-installed box for rapid installation and problem-free pipe feedthroughs.
Special plaster base board guarantees premium quality in the event of pressure or temperature fluctuations
Easy height adjustment
Based on a marking in the middle of the wall panel
Pre-insulation
Quick and simple additional insulation possible
Huge time savings
- Pipe feedthroughs are pre-assembled without tension and ready for connection
- The enlarged and elegant wall panels increase the accuracy of the wall connection
No extension required
- Drywall can be sealed immediately
Stable substrate
The plaster and tile base boards guarantee a permanently stable substrate.
Optimum insulation
The fittings are protected thanks to the millimetre-precise outlet guides
Please state the desired pipe system when ordering.
The following information is required:
Pipe manufacturer: e.g. Viega
Pipe type: e.g. Raxofix
Your order cannot be processed without this information.
Custom production. Extended delivery times (maximum 7 working days).
These products cannot be exchanged or returned. Each order is manufactured individually to the customer's specifications
Datasheets(X)
For sanitary installations in masonry
1. The corresponding recesses must be left in the masonry using the installation box supplied or the installation recommendation.
2. The box must then be fixed in place using the assembly jig and foam-filled with 1C assembly foam.
3. Leave to harden according to the instructions supplied with the foam and remove the assembly jig.
 | |
Box width | 240 mm |
Box height | 270 mm |
Box depth | 70 mm |
Water inlet | Cold water, Warm water |
Distance centre of pipe to centre of pipe | 150 mm |
Manufacturer of drain pipe | Geberit |
Drain pipe length | 420 mm |
DN tube connection | Nominal diameter 16 from below |
Material of box | Closed-cell polyurethane foam |
DN drain pipe | DN 40 |
Pipe length | 1000 mm |
Manufacturer of pipe system | Freely selectable |
Colour | Red |
Product weight (per item) | 996 g |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Corvus suede S3 safety shoe
Straight pin with flat points DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h8
Clamping pin/clamping sleeve
Automatic welding helmet WSH AIR III 5-13
4KS profile thumbturn cylinder for keyed alike systems with original equipment
Connecting sleeve for electrical conduits W-IS-EL-F, WPKu-EM-F and WPKu-EM-F-H0
1/4 inch bit holder, magnetic
Hexagon nut, low profile, inch
ASSY® 3.0 zinc-nickel-plated timber screw
Connector, pneumatic