Installation box, washing machine connection, masonry
Inst. box wash mchne connect, freely slctble MN
IB-WM-MN-DN16-UPR-UP-DN50
Register now and access more than 125,000 products
Special plaster base board guarantees premium quality in the event of pressure or temperature fluctuations
Easy height adjustment
Based on a marking in the middle of the wall panel
Pre-insulation
Quick and simple additional insulation possible
Huge time savings
- Pipe feedthroughs are pre-mounted without tension and ready for connection
- The enlarged and elegant wall panels increase the accuracy of the wall connection
No extension required
- Drywall can be sealed immediately
Stable subsurface
The plaster and tile base boards guarantee a permanently stable subsurface
Optimum insulation
The fittings are protected thanks to the millimetre-precise outlet guides
Please state the required pipe system when ordering.
The following information is required:
Pipe manufacturer: e.g. Viega
Pipe type: e.g. Raxofix
Your order cannot be processed without this information.
Custom production. Extended delivery times up to max. 7 working days.
These products cannot be exchanged or returned. Each order is manufactured individually to the customer's specifications
Datasheets(X)
For sanitary installations in masonry
1. The corresponding recesses must be left in the masonry using the installation box supplied or the installation recommendation.
2. The box must then be fixed in place using the assembly jig and foam-filled with 1C assembly foam.
3. Leave to harden according to the instructions supplied with the foam and remove the assembly jig.
 | |
Box width | 200 mm |
Box height | 270 mm |
Box depth | 70 mm |
Water inlet | Cold water |
Material of box | Closed-cell polyurethane foam |
DN drain pipe | DN 50 |
DN tube connection | Nominal diameter 16 from above |
Pipe length | 1500 mm |
Manufacturer of pipe system | Freely selectable |
Design | Including covering rosette and connection curve |
Colour | Red |
Product weight (per item) | 610 g |
Last viewed
Low-cut safety shoes, S1P
Cleaning paper stand
Hexagonal nut with flange and clamping piece (non-metallic insert)
Fire-retardant pads
Low-cut safety shoes, S3
Hexagon nut ISO 4032 steel 8, hot-dip galvanised (HDG)
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Profile system
Circular blade
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated