Installation box, washing machine connection, masonry
Inst. box wash mchne connect, freely slctble MN
IB-WM-MN-DN20-LWR-UP-DN50
Register now and access more than 125,000 products
Special plaster base board guarantees premium quality in the event of pressure or temperature fluctuations
Easy height adjustment
Based on a marking in the middle of the wall panel
Pre-insulation
Quick and simple additional insulation possible
Huge time savings
- Pipe feedthroughs are pre-mounted without tension and ready for connection
- The enlarged and elegant wall panels increase the accuracy of the wall connection
No extension required
- Drywall can be sealed immediately
Stable subsurface
The plaster and tile base boards guarantee a permanently stable subsurface
Optimum insulation
The fittings are protected thanks to the millimetre-precise outlet guides
Please state the required pipe system when ordering.
The following information is required:
Pipe manufacturer: e.g. Viega
Pipe type: e.g. Raxofix
Your order cannot be processed without this information.
Custom production. Extended delivery times up to max. 7 working days.
These products cannot be exchanged or returned. Each order is manufactured individually to the customer's specifications
Datasheets(X)
For sanitary installations in masonry
1. The corresponding recesses must be left in the masonry using the installation box supplied or the installation recommendation.
2. The box must then be fixed in place using the assembly jig and foam-filled with 1C assembly foam.
3. Leave to harden according to the instructions supplied with the foam and remove the assembly jig.
 | |
Box width | 200 mm |
Box height | 270 mm |
Box depth | 70 mm |
Water inlet | Cold water |
Material of box | Closed-cell polyurethane foam |
DN drain pipe | DN 50 |
DN tube connection | Nominal diameter 20 from below |
Pipe length | 1500 mm |
Manufacturer of pipe system | Freely selectable |
Design | Washing machine, without socket |
Colour | Red |
Product weight (per item) | 675 g |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
KPF wide sanding belt, individual
Order protector with rip-tape fastening
Work dungarees
Guttering bracket
Hexagon nut DIN 934, steel I8I, hot-dip galvanised (hdg)
Drawer divider set, BASIC KWB, 16 compartments
Twist drill bit, metal Ruko DIN 338 HSS-G TiAlN
Type ETA-L staples Plain stainless steel 1.4301, resin-coated
Centre-grooved dowel pins ISO 8742 steel plain
Case insert for MASTER/M-CUBE power tools