Installation box water meter masonry
Installation box water meter masonry
IB-WTRM-MW-TECHEM-ENZL-GROHE
Register now and access more than 125,000 products
Completely pre-installed box for rapid installation and problem-free pipe feedthroughs
Special plaster base board guarantees premium quality in the event of pressure or temperature fluctuations
Easy height adjustment
Based on a marking in the middle of the wall panel
Pre-insulation
Quick and simple additional insulation possible
Huge time savings
- Pipe feedthroughs are pre-assembled without tension and ready for connection
- The enlarged and elegant wall panels increase the accuracy of the wall connection
No extension required
- Drywall can be sealed immediately
Stable substrate
The plaster and tile base boards guarantee a permanently stable substrate.
Optimum insulation
The fittings are protected thanks to the millimetre-precise outlet guides.
Custom production. Extended delivery times up to max. 7 working days.
These products cannot be exchanged or returned. Each order is manufactured individually to the customer's specifications
Datasheets(X)
For sanitary installations in masonry
1. The corresponding recesses must be left in the masonry using the installation box supplied or the installation recommendation.
2. The box must then be fixed in place using the assembly jig and foam-filled with 1C assembly foam.
3. Leave to harden according to the instructions supplied with the foam and remove the assembly jig.
Box width | 170 mm |
Manufacturer of water meter | Techem |
Manufacturer of valve | Grohe |
Number of water meter | 1 PCS |
Box height | 240 mm |
Box depth | 70 mm |
Shut-off valve | 3/4 inch |
Material of box | Closed-cell polyurethane foam |
Product weight (per item) | 1722 g |
Colour | Red |