Installation power tool For thread inserts
Mechanical screw-in tool
SCRINTL-HELCINRT-MECH-HEX-1/4IN-M3X0,5
Register now and access more than 125,000 products
The following thread inserts can be mechanically installed using this screw-in tool:
- W.Tec® type FR and SG helical inserts
- Self-tapping thread inserts with cutting slot
- Self-tapping thread inserts with cutting bore
Datasheets(X)
Suitable for thread insert | M3 |
Length | 46 mm |
Material | Steel |
Adapter type | 1/4 inch, hexagon adapter |
Last viewed
Screw, pan head, inch
Safety boots, S3
Cylindrical pin, unhardened ISO 2338 A1 stainless steel (m6)
Drill bushing DIN 179, steel, plain, shape A
Countersunk tapping screw, shape C with hexalobular drive ISO 14586, A2 stainless steel, shape C (with tip)
Adjustable straight sealing cone male fitting ISO 8434-1, zinc-nickel-plated steel, BSPP male thread with o-ring
Pan Head screw with hexalobular head ISO 14583, A4-70 stainless steel, plain
Screw hex. head with full thread
Serrated lock ring, shape VSKZ
Fully threaded hexagonal bolt and fine thread