Installation power tool For thread inserts
Mechanical screw-in tool
SCRINTL-HELCINRT-MECH-HEX-1/4IN-M5X0,8
Register now and access more than 125,000 products
The following thread inserts can be mechanically installed using this screw-in tool:
- W.Tec® type FR and SG helical inserts
- Self-tapping thread inserts with cutting slot
- Self-tapping thread inserts with cutting bore
Datasheets(X)
Suitable for thread insert | M5 |
Length | 57 mm |
Material | Steel |
Adapter type | 1/4 inch, hexagon adapter |
Last viewed
Work dungarees
Countersunk screw with hexalobular head ISO 14581, steel, strength class 8.8, zinc-nickel-plated, black (ZNBHL)
Centre-grooved dowel pins ISO 8742 steel plain
Tapping screws, pan head with collar assortment 1402 pieces in system case 4.4.1.
EPS profile thumbturn cylinder
Drilling screw, pan head with collar and H cross recess pias®
Starline Plus work dungarees
Single-sided tooth plate connector type C11
Leather gloves W-70
Twist drill bit HSCo DIN 340 type RN OXIDE