Installation power tool For thread inserts
Mechanical screw-in tool
SCRINTL-HELCINRT-MECH-HEX-1/4IN-M6X1,0
Register now and access more than 125,000 products
The following thread inserts can be mechanically installed using this screw-in tool:
- W.Tec® type FR and SG helical inserts
- Self-tapping thread inserts with cutting slot
- Self-tapping thread inserts with cutting bore
Suitable for thread insert | M6 |
Length | 62 mm |
Material | Steel |
Adapter type | 1/4 inch, hexagon adapter |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Straight male fitting ISO 8434-1, zinc-nickel-plated steel, tapered BSPT male thread
Cover cap for screws with head recess
90° HSCo WN type RN TiAlN NC spotting drill bit
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain
Work jacket
Ball valve
HSS 90° yellow-ring countersink DIN 335C
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Countersunk head screw with H cross recess ISO 7046-2, A2-70 stainless steel, plain
Hexagonal bolt with thread up to the head
