Welcome to Würth Aerospace Solutions For trade customers only
Insulation anchor set, stainless steel W-ID - DWL-(W-ID)-PLA-KIT-30X95-M10-A2

Insulation anchor set, stainless steel W-ID

Insulation anchor W-ID A2 stainless steel set
DWL-(W-ID)-PLA-KIT-30X95-M10-A2

Art.-no. 090350097
EAN 4050642382480
All versions

Prices for customers after login
Insulation anchor set, stainless steel W-ID

Art.-no. 090350097

Prices for customers after login
Quantity
PU
x 20 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

For fastening light loads in pressure-resistant insulating materials (e.g. façade with ETICS). With pre-assembled stud screw made of A2 stainless steel
  • Avoids the need for complicated, stand-off installation for lightweight fastening

  • Fast, cost-effective attachment

  • No thermal bridges created

  • Resistant to rotting, weathering and ageing (high-quality PE)

  • For use with a cordless drill/driver; can also be installed manually

  • Suitable for pre-positioned installation

  • Attachment via mechanical interlock

  • Supplied pre-assembled

  • The stair bolt can be removed or partially unscrewed for alignment


Scope of delivery:


  • W-ID 95

  • PA6 collar

  • PVC hose, 12.0 x 65 mm

  • Stair bolt, M10 x 120 mm, A2

Screw in anchor without pre-drilling

Apply the plaster layer and remove the protective cap after drying

Fill the cavities between the plaster and stud screw with silicone

Screw on the cover rosette

Attach the attachment part

Pre-drill the plaster until the insulation layer

Screw the dowels into the pre-drilled hole and remove the protective cap

Fill the cavities between the plaster and stud screw with silicone

Screw on the cover rosette

Attach the attachment part
Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area
  • For attaching light loads in rigid foam panels (e.g. external walls with thermal insulation composite systems)

  • Can be used outdoors or in wet rooms in conjunction with a stainless steel screw

  • Attaching building signs, lighting, alarm systems etc. and in construction of refrigeration/air-conditioning systems, insulation, prefabricated buildings, façades, electrical installations etc.

  • W-ID set in A2 (stainless steel A2) can be used outdoors or in wet rooms. The cover rosette must then be sealed with silicon to prevent penetration of moisture

Anchor length (l)

95 mm

Drill hole diameter in plaster/cladding sheet metal (d)

30 mm

Included in delivery

PA6 cover rosette, PVC hose 12.0 x 65 mm, stud screw M10 x 120 mm A2

Material

PE - Polyethylene

Colour

White

Thread diameter of screw (d thr)

8 mm

Material of screw

Stainless steel A2

Type description

W-ID

Number of pieces in assortment/set

4 PCS

Embedding depth (h s)

95 mm

Min. temperature resistance

-20 °C

Max. temperature resistance

100 °C

Nominal drill diameter (d 0) - condition

Do not pre-drill

Hole diameter in component (d Bau)

5 mm

Minimum component thickness (d)

95 mm

Edge clearance (a r)

150 mm

Max. screw-in depth (d a)

70 mm

Resistance against

Aging
Rotting
Weather

Centre-to-centre distance (a)

300 mm

Performance data
Anchor5095
Recommended
Load		Expandable polystyrene ≥ PS 20Fempf. [kN]0,0040,08
PUR 30 hard foam0,120,20
Axis distancea ≥ [mm]150300
Edge spacingar [mm]75150
Setting depthhs [mm]5095
Minimum component thicknessd ≥ [mm]5095
Threaded ∅ screwdGew [mm]4-5 / M48 / M8 1
Nominal drill ∅dBohr [mm]w/o pre-drilling
Hole ∅ in componentdBau [mm]4,5-5,58.5 or 4.5-5.5
Drill hole ∅ in plaster
or façade plate		d [mm]1830
1 With art. no. the screw diameter can be reduced to 4-5 with an M8 screw, can be screwed at least 35 mm into the anchor.
Insulation anchor set, stainless steel W-ID including:
Insulation anchor W-ID
20 x
Insulation anchor W-ID

DWL-(W-ID)-PLA-30X95

Description: For fastening light loads in pressure-resistant insulating materials (e.g. façade with ETICS)
Quantity: 20 x
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)

SCR-HEX-ISO4017-8.8-WS13-(A2K)-M8X30

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
Collar For securing downpipes
Collar For securing downpipes

COVROS-F.RNWTRPIPMNT-DWL

For visually covering the insulation anchor SHARK® ISO 95 sets and the spacer installation system AMO®-Therm Mini
x 10 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additive article:
 
Product
Description
Quantity
PU
Price
/PU
Connector DIN 7428 E 6.3 (1/4 inch)
Connector DIN 7428 E 6.3 (1/4 inch)

HOLD-BIT-IMPNUT-HEX-1/4INX4PT-1/2IN-L74

Allows the use of socket wrenches on machines with a standard drill chuck.
x 1 pcs
Metric combination wrench with POWERDRIV<SUP>®</SUP>
Metric combination wrench with POWERDRIV®

COMBIWRNCH-ANGLD-SHORT-WS8

ZEBRA
Short shape, ZEBRA® professional-quality tool
Screwdriving tool For stair bolts
Screwdriving tool For stair bolts

SPN-STUDSCR-1/2IN-M10

No screwing in or additional adjustment of screw-in parts into nut required
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details