Interior trim clip, type 2 Foot divided into four parts, head round
Interior trim clip, type 2
INTRMCLIP-MB-LIGHTGREEN
Register now and access more than 125,000 products
- Pre-mounted on the trim and then inserted into a corresponding hole on the base component.
- Tolerance compensation possible
- Removal of the trim possible
- Also serves as a seal
Datasheets(X)
Fastening of trims to carrier components
Material | Polyoxymethylene |
Colour | Green |
Min./max. drill hole diameter | 8-8.2 mm |
Min./max. attachment thickness | 0.7-1 mm |
Head diameter | 13.2 mm |
Core diameter | 5.9 mm |
Grip range head | 2.3 mm |
Max. width | 17.6 mm |
Length below head | 16.5 mm |
Type of vehicle | Universal |
Corresponds to original spare part number | A0079889978 |
Last viewed
C 8.0 TX bit (5/16 inch) C 8.0 (5/16 inch)
Fire protection stoppers
Work trousers
Hexagon nut, low profile, with clamping piece (non-metal insert), fine thread DIN 985, A4 stainless steel, plain
FLEXEN® adhesive For FLEXEN® S2 rubber foam heat insulation, rubber foam refrigeration insulation plus, rubber foam refrigeration insulation, PE, PE stable, compact eccentric block
Low-cut safety shoes, S1P
Universal snips
Storage box W-Line Silver
Amo® III 7.5 type 2 window frame screw Cylinder head 8.0 mm
Weatherproof trousers