Interior trim clip, type 2
Interior trim clip with open anchor
INTRMCLIP-POM-BLACK-D5,0MM
Register now and access more than 125,000 products
- Pre-mount on the trim and then insert into a corresponding hole on the base component
- Tolerance compensation is possible
- The trim can be removed
- Can also be used as a seal
For fastening trims to carrier components.
Pre-mount on the trim and then insert into a corresponding hole on the base component.
 | |
Min./max. drill hole diameter | 5.00-5.00 mm |
Min./max. attachment thickness | 0.70-0.80 mm |
Head diameter (A) | 5.40 mm |
Core diameter (B) | 3.00 mm |
Width (C) | 6.00 mm |
Length below head (D) | 9.10 mm |
Grip range head (E) | 2.20 mm |
Colour | Black |
Material | Polyoxymethylene |
Suitable for vehicle manufacturer | Universal, Ford |
Corresponds to original spare part number | 1042065, W702985S300 |
Installation location | Bodywork, Universal |
Type of vehicle | Passenger car |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Cover cap for number plate screw Article prefix number 0210
Saddle washer for trapezoidal profile
EPS profile thumbturn cylinder
Dunlop S5 safety wellington boot
Door closer GTS 620 with slide rail
Stud with threaded end ≈ 1.25 d DIN 939, steel 8.8, zinc-plated, blue passivated (A2K)
STC end mill Speedtwister-Universal, long, optional, five cutting edges, uneven angle of twist gradient, 3xD
Cylindrical pin with female thread DIN 7979, steel plain, hardened, tolerance class m6
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated (A2K)
PRO plastic box set
