Interior trim clip, type 2
Interior trim clip, type 2
INTRMCLIP-POM-GREEN-D18,2MM
Register now and access more than 125,000 products
- Pre-mounted on the trim and then inserted into a corresponding hole on the base component.
- Tolerance compensation possible
- Removal of the trim possible
- Also serves as a seal
Datasheets(X)
Fastening of trims to carrier components
Material | Polyoxymethylene |
Colour | Green |
Head diameter | 13.2 mm |
Length below head | 13.65 mm |
Type of vehicle | Passenger car |
Corresponds to original spare part number | 1011813-00-A |
Last viewed
Cheese head screw with hexagon socket head and shoulder ISO 7379, A2-050 stainless steel, plain, tolerance f9
Protective clothing, disposable
Large flat paintbrush Professional
Hexagonal bolt with shank
Façade construction screw Faba® type A with hexagon head and sealing washer
EPS profile double cylinder
Slotted raised countersunk head screw DIN 964, steel 4.8, zinc-plated, blue passivated (A2K)
Fully threaded hexagonal bolt and fine thread
Hexagonal nut with clamping piece (non-metal insert) ISO 7040, steel 8, zinc-plated, blue passivated (A2K)
Screw, hexagon head, inch