Interior trim clip, type 2
Interior trim clip, type 2
INTRMCLIP-PSA-CITR/PEUG-BLACK
Register now and access more than 125,000 products
- Pre-mounted on the trim and then inserted into a corresponding hole on the base component.
- Tolerance compensation possible
- Removal of the trim possible
- Also serves as a seal
Datasheets(X)
Fastening of trims to carrier components
Material | Polyoxymethylene |
Colour | Black |
Min./max. drill hole diameter | 9.5-9.5 mm |
Min./max. attachment thickness | 0.8-0.8 mm |
Head diameter | 10 mm |
Core diameter | 6 mm |
Grip range head | 2.8 mm |
Max. width | 18 mm |
Length below head | 14.9 mm |
Type of vehicle | Universal |
Corresponds to original spare part number | 856535 |
Last viewed
Sharpening stone For diamond cutting discs, cup wheels and core drill bits (excl. PCD)
Connecting sleeve for WSS 225-E COMPACT
HSS WN centre drill bit For HW hole saws (flat cut) and MBS HW cylinder saws
Rivet nut with flat head and knurled shank
Hexalobular screw with flattened half round head and collar
Hexagonal bolt with shank and fine thread DIN 960, steel 10.9, zinc-plated, blue passivated (A2K)
Welding studs DIN 34828, steel S235JR, plain, for turnbuckles
Mechanical manual crimping pliers
Tapered roller bearing FAG
Hexagon nut with fine thread ISO 8673, steel 6, plain