Interior trim clip, type 3
Interior trim clip, type 3
INTRMCLIP-FORD-POM-TRANSP
Register now and access more than 125,000 products
- Pre-mounted on the trim and then inserted into a corresponding hole on the base component.
- Tolerance compensation possible
- Removal of the trim possible
- Also serves as a seal
Datasheets(X)
Fastening of trims to carrier components
Material | Polyoxymethylene |
Colour | White |
Min./max. drill hole diameter | 8-8.4 mm |
Min./max. attachment thickness | 0.7-1 mm |
Head diameter | 13.2 mm |
Core diameter | 5.5 mm |
Grip range head | 2.1 mm |
Max. width | 18.5 mm |
Length below head | 18 mm |
Type of vehicle | Universal |
Corresponds to original spare part number | 6176723 |
Corresponds to original spare part number 2 | 6117693 |
Last viewed
K Plus insulation pipe clamp With separate insulation part
Round head screw with square neck DIN 603, A4 stainless steel
Reducing nipple, imperial thread EN10242 N4 shape II, hot-dip galvanised malleable iron
Low-cut safety shoes, S1P
Welder clothing
PZ AL 130/AL 30 lever/handle set
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
High-visibility vest Asatex WTGP3
Drilling screw, hexagon head with reduced drill tip and sealing washer piasta®
Tapered pin, unhardened DIN 1, A1 stainless steel, plain