Interior trim clip, closed
Interior trim clip with closed anchor
INTRMCLIP-HONDA-ORANGE
Register now and access more than 125,000 products
- Pre-mount on the trim and then insert into a corresponding hole on the base component
- Tolerance compensation is possible
- The trim can be removed
- Can also be used as a seal
For fastening trims to carrier components.
Pre-mount on the trim and then insert into a corresponding hole on the base component.
 | |
Min./max. drill hole diameter | 8.40-8.40 mm |
Min./max. attachment thickness | 2.00-6.50 mm |
Head diameter (A) | 18.00 mm |
Core diameter (B) | 9.20 mm |
Width (C) | 8.40 mm |
Length below head (D) | 9.00 mm |
Grip range head (E) | 2.40 mm |
Colour | Orange |
Material | Polyoxymethylene |
Suitable for vehicle manufacturer | Honda |
Corresponds to original spare part number | 91560S6A003, 90664sb0004 |
Installation location | Interior |
Type of vehicle | Passenger car |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Hexagonal bolt with flange in accordance with MBN standard
Multifit nitrile Economy protective glove
Half-shell pin crimping insert
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Damper system
Insert nut
Wheel set 4 swivel castors dia. 100 mm
Work trousers
Parking disc with ice scraper
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
