Interior trim clip, type 3
Interior trim clip, type 3
INTRMCLIP-POM-BLCK-D17,5MM
Register now and access more than 125,000 products
- Pre-mounted on the trim and then inserted into a corresponding hole on the base component.
- Tolerance compensation possible
- Removal of the trim possible
- Also serves as a seal
Datasheets(X)
Fastening of trims to carrier components
Material | Polyoxymethylene |
Colour | Black |
Head diameter | 21.5 mm |
Length below head | 12.40 mm |
Type of vehicle | Passenger car |
Corresponds to original spare part number | 1135147-00-A |
Last viewed
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Tubular rivet shape A
SCHIMOS 80/120-H front panel profile for wooden doors
Standard cable tie with plastic latch
Key, high profile DIN 6885, stainless steel 1.4571, shape A
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
EPS profile thumbturn cylinder
Sliding part For aluminium extension ladders
3D hinge dia. 16 mm With three bolts on the frame section