Interior trim clip, type 3
Interior trim clip, type 3
INTRMCLIP-POM-RBRLIP-UNCOL-D8,2MM
Register now and access more than 125,000 products
- Pre-mounted on the trim and then inserted into a corresponding hole on the base component.
- Tolerance compensation possible
- Removal of the trim possible
- Also serves as a seal
Datasheets(X)
Fastening of trims to carrier components
Material | Combi-material |
Colour | Neutral |
Min./max. drill hole diameter | 8.2-8.2 mm |
Min./max. attachment thickness | 0.6-1.5 mm |
Head diameter | 22.4 mm |
Core diameter | 4.9 mm |
Grip range head | 3 mm |
Max. width | 18.9 mm |
Length below head | 15.4 mm |
Type of vehicle | Passenger car |
Corresponds to original spare part number | 9345ZN, 7703077476 |
Corresponds to original spare part number 2 | 7703077476 |
Last viewed
Compass with pencil holder
Work jacket
Taper pins with external thread, unhardened DIN 8737, steel, plain
Clamping pin/clamping sleeve
Slotted set screw with truncated cone DIN 551, A4 stainless steel, plain
Softshell jacket
Radial shaft seal FKM shape A
Hinge pin For shutter hinges
Straight male fitting ISO 8434-1, zinc-nickel-plated steel, NPT male thread
Hexagon head bolt with shank for pressure container construction (PED) ISO 4014, steel 25CrMo4, plain