Interior trim clip, type 3
Interior trim clip, type 3
INTRMCLIP-POM-SEAL-GREY-(D7,9-8,0MM)
Register now and access more than 125,000 products
- Pre-mounted on the trim and then inserted into a corresponding hole on the base component.
- Tolerance compensation possible
- Removal of the trim possible
- Also serves as a seal
Datasheets(X)
Fastening of trims to carrier components
Material | Polyoxymethylene |
Colour | Grey |
Min./max. drill hole diameter | 7.9-8 mm |
Min./max. attachment thickness | 1.7-1.8 mm |
Head diameter | 14.5 mm |
Core diameter | 6 mm |
Grip range head | 2.5 mm |
Max. width | 18 mm |
Length below head | 16.8 mm |
Type of vehicle | Passenger car |
Corresponds to original spare part number | 51418224781 |
Last viewed
Key, high profile DIN 6885, stainless steel 1.4571, shape A
Circlip DIN 472
Wooden standing ladder with rungs
Hammer drill bit multi-pack with SDS-plus drive arbor Duo-S Vario 12 pcs
Helical insert W.TEC® INSERT COIL Free Running fine thread
Load block with captive screw
Manual screw tap, third tap Ruko hand tap HSCo DIN 352 third tap
Cylindrical pin with female thread, unhardened DIN 7979, shape C, unhardened
Combination wrench, inch with POWERDRIV®
Labelling pocket with wire hanger