Intermediate anchor point load substrate
Intermediate anchor point load substrate
ANCPT-LOAD-INTMED-SUBSTRATE-S487-800
Register now and access more than 125,000 products
- Penetration-free anchor point in accordance with DIN EN 795 type E or for use in a rope system
- Easy installation with supplied fleece
- Support heights 300-800 mm
- In a rope system for securing a maximum of 2 persons
- Spacing in rope system up to max. 10 m
Intended for temporary use. Bulk/substrate for intermediate support is not included in the scope of delivery.
DIN EN 795, type E
Datasheets(X)
Intermediate support for load-bearing temporary rope system
EN standard | 795 |
Material | Stainless steel/aluminium |
Width | 3 m |
Height | 80 cm |
Length | 3 m |
Last viewed
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
Hexagon nut with left-hand thread DIN 934, steel I8I, zinc-plated, blue passivated (A2K)
Protective glove, knitted and coated
Cylinder head serrated screw with hexagon socket
AP damp-room intermediate switch
Low-cut safety shoes, S1
Jacket Planam Highline
Clamping screw for ISO C clamping system
Façade membrane STAMISOL EXTREME Color
Countersunk head screw with recessed head, H DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)