Intermediate layer for ISO P clamping system
Intermediate layer for ISO P clamping system
AY-SHIM-ISO-P-CLMPSYS-SD317
Register now and access more than 125,000 products
Datasheets(X)
Length | 9.35 mm |
Internal diameter | 5.2 mm |
Thickness | 2.7 mm |
Last viewed
Safety boots, S4
Connecting screw With sleeve
Twist drill bit, metal Ruko DIN 338 type VA HSCo8 plain
Divider assortment With compartment rails and compartment dividers for system dimensions 16.6
HSCo Longlife TiAlN+ red-ring machine tap for blind holes DIN 371/376
ASSY® D
plug screw Pan head, without drill tip
W-VD-A anchor rod A4 stainless steel
Sleeve, reduced with female and male thread EN10242 M4, hot-dip galvanised malleable iron
Hexagon head bolt with shank and fine thread ISO 8765, steel 8.8, zinc flake, silver (ZFSHL)
Hexagonal bolt with shank and fine thread ISO 8765, steel 8.8, zinc-plated, blue passivated (A2K)