Internal thread anchor W-VI-IG, A4 stainless steel
Female-thread anchor W-VI-IG/A4, sst A4
ANC-(W-VI-IG/A4)-A4-M6X80
Art.-no. 5915706080
EAN 4056807086125
Register now and access more than 125,000 products
The anchor rod is covered by the following approvals/assessments:
- Injection system ALLROUNDER WIT-VM 250, masonry: ETA-16/0757, ETA-20/0854
- Injection system WIT-Nordic, masonry: ETA-16/0757
- Injection system CONCRETE-MULTI WIT-UH 300, OPTION 1: ETA-17/0127
- Injection system PURE EPOXY WIT-PE 1000, OPTION 1: ETA-19/0542
Datasheets(X)
Can be used for the following injection systems:
- Injection system ALLROUNDER WIT-VM 250, masonry (SH) - solid brick and perforated brick, aerated concrete
- Injection system WIT-Nordic, masonry (SH) - solid brick and perforated brick, aerated concrete
- Injection system CONCRETE-MULTI WIT-UH 300, cracked and uncracked concrete
- Injection system PURE-EPOXY WIT-PE 1000, cracked and uncracked concrete
W-VI-IG/A4 (stainless steel A4) can be used in dry indoor areas, outdoors (including in industrial atmospheres and close to the sea) or in wet rooms, provided that no particularly aggressive conditions are present.
Type description | W-VI-IG/A4 |
Female thread | 6 mm |
Length | 80 mm |
Suitable for perforated sleeve | SH 16 x 85 |
Nominal drill-bit diameter (d 0) | 12 mm |
Effective anchoring depth (h ef) | 80 mm |
Nominal drill-bit diameter perforated sleeve (d 0) | 16 mm |
Effective anchoring depth perforated sleeve (h ef) | 85 mm |
Drill hole depth (h 0) | 90 mm |
Min./max. screw-in depth | 8-20 mm |
Required injection mortar | WIT-VM 250, WIT-UH 300, WIT-PE 1000 |
Approval | ETA-16/0757, ETA-17/0127, ETA-19/0542 |
Material | Stainless steel A4, 1.4401 |
Surface | Plain |
Last viewed
Twist drill bit HSCo DIN 338 type RN oxide
Ratchet strap, two pieces Heavy-duty design with double J-hook
Flexible electrical conduit WFKuS-EM-F-105-H0 ComfortXQ® with high-glide inner coating
Belleville washer EN 16983, phosphated steel
Screw caps GPN 800
Hexagonal bolt with thread up to the head ASME B18.2.1, blue passivated zinc plated GR5 steel (A2K), UNC (comparable with ISO metric thread)
Coupling element for system case
Wire feeder
Circlip with tabs, type AK for shaft DIN 983, steel plain, type AK
Hexagonal bolt with shank for pressure container construction ISO 4014, steel 5.6, zinc-plated, blue passivated (A2K)