Internal thread anchor W-VI-IG, A4 stainless steel for Allrounder WIT-VM 250, masonry with SH perforated sleeve, Concrete Multi WIT-UH 300 and Pure Epoxy WIT-PE 1000 injection systems
Female-thread anchor W-VI-IG/A4, sst A4
ANC-(W-VI-IG/A4)-A4-M10X100
Register now and access more than 125,000 products
The anchor rod is covered by the following approvals/assessments:
- Injection system ALLROUNDER WIT-VM 250, masonry: ETA-16/0757, ETA-20/0854
- Injection system WIT-Nordic, masonry: ETA-16/0757
- Injection system CONCRETE-MULTI WIT-UH 300, OPTION 1: ETA-17/0127
- Injection system PURE EPOXY WIT-PE 1000, OPTION 1: ETA-19/0542
Datasheets(X)
Can be used for the following injection systems:
- Injection system ALLROUNDER WIT-VM 250, masonry (SH) - solid brick and perforated brick, aerated concrete
- Injection system WIT-Nordic, masonry (SH) - solid brick and perforated brick, aerated concrete
- Injection system CONCRETE-MULTI WIT-UH 300, cracked and uncracked concrete
- Injection system PURE-EPOXY WIT-PE 1000, cracked and uncracked concrete
W-VI-IG/A4 (stainless steel A4) can be used in dry indoor areas, outdoors (including in industrial atmospheres and close to the sea) or in wet rooms, provided that no particularly aggressive conditions are present.
Type description | W-VI-IG/A4 |
Female thread | 10 mm |
Length | 100 mm |
Nominal drill-bit diameter (d 0) | 18 mm |
Effective anchoring depth (h ef) | 100 mm |
Drill hole depth (h 0) | 100 mm |
Min./max. screw-in depth | 10-25 mm |
Required injection mortar | WIT-VM 250 |
Approval | ETA-16/0757 |
Material | Stainless steel A4, 1.4401 |
Surface | Plain |
Last viewed
ISO insert holder with D clamping system for DN indexable inserts
Flexible electrical conduit WFKuS-EM-F-105-H0 ComfortXQ® With high-glide inner coating
3D hinge ∅ 20 mm
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
HPT extra-short twist drill bit DIN 1897
Flat-sealing half screw connection EN1254, gunmetal, 3335
Pocket tape measure 2C-PT18
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)
SC Speedcut universal end mill, long, optional, four blade, variable helix DIN 6527L, HA shank
Stud screw A2 stainless steel