Internal thread anchor W-VI-IG, A4 stainless steel for Allrounder WIT-VM 250, masonry with SH perforated sleeve, Concrete Multi WIT-UH 300 and Pure Epoxy WIT-PE 1000 injection systems
Female-thread anchor W-VI-IG/A4, sst A4
ANC-(W-VI-IG/A4)-A4-M20X200
Register now and access more than 125,000 products
The anchor rod is covered by the following approvals/assessments:
- Injection system ALLROUNDER WIT-VM 250, masonry: ETA-16/0757, ETA-20/0854
- Injection system WIT-Nordic, masonry: ETA-16/0757
- Injection system CONCRETE-MULTI WIT-UH 300, OPTION 1: ETA-17/0127
- Injection system PURE EPOXY WIT-PE 1000, OPTION 1: ETA-19/0542
Datasheets(X)
Can be used for the following injection systems:
- Injection system ALLROUNDER WIT-VM 250, masonry (SH) - solid brick and perforated brick, aerated concrete
- Injection system WIT-Nordic, masonry (SH) - solid brick and perforated brick, aerated concrete
- Injection system CONCRETE-MULTI WIT-UH 300, cracked and uncracked concrete
- Injection system PURE-EPOXY WIT-PE 1000, cracked and uncracked concrete
W-VI-IG/A4 (stainless steel A4) can be used in dry indoor areas, outdoors (including in industrial atmospheres and close to the sea) or in wet rooms, provided that no particularly aggressive conditions are present.
Type description | W-VI-IG/A4 |
Female thread | 20 mm |
Length | 200 mm |
Nominal drill-bit diameter (d 0) | 35 mm |
Effective anchoring depth (h ef) | 200 mm |
Drill hole depth (h 0) | 200 mm |
Min./max. screw-in depth | 20-40 mm |
Required injection mortar | WIT-UH 300 |
Approval | ETA-17/0127 |
Material | Stainless steel A4, 1.4401 |
Surface | Plain |
Last viewed
Shim ring DIN 988, steel, plain
Safety sandals, S1P
System case empty range 4.4.1 raster foam
Washer ISO 7090 steel 300 HV zinc-plated thick-film passivated with sealing (ZSM)
Cutting disc, carbide-tipped
HSS AlTiN SMART STEP stepped twist drill bit
Pressure cylinder lift 152 mm
Low-cut safety shoe S3
Welding blanket
Support plate