Internal thread anchor W-VI-IG, A4 stainless steel for Allrounder WIT-VM 250, masonry with SH perforated sleeve, Concrete Multi WIT-UH 300 and Pure Epoxy WIT-PE 1000 injection systems
Female-thread anchor W-VI-IG/A4, sst A4
ANC-(W-VI-IG/A4)-A4-M6X80
Register now and access more than 125,000 products
The anchor rod is covered by the following approvals/assessments:
- Injection system ALLROUNDER WIT-VM 250, masonry: ETA-16/0757, ETA-20/0854
- Injection system WIT-Nordic, masonry: ETA-16/0757
- Injection system CONCRETE-MULTI WIT-UH 300, OPTION 1: ETA-17/0127
- Injection system PURE EPOXY WIT-PE 1000, OPTION 1: ETA-19/0542
Datasheets(X)
Can be used for the following injection systems:
- Injection system ALLROUNDER WIT-VM 250, masonry (SH) - solid brick and perforated brick, aerated concrete
- Injection system WIT-Nordic, masonry (SH) - solid brick and perforated brick, aerated concrete
- Injection system CONCRETE-MULTI WIT-UH 300, cracked and uncracked concrete
- Injection system PURE-EPOXY WIT-PE 1000, cracked and uncracked concrete
W-VI-IG/A4 (stainless steel A4) can be used in dry indoor areas, outdoors (including in industrial atmospheres and close to the sea) or in wet rooms, provided that no particularly aggressive conditions are present.
Type description | W-VI-IG/A4 |
Female thread | 6 mm |
Length | 80 mm |
Suitable for perforated sleeve | SH 16 x 85 |
Nominal drill-bit diameter (d 0) | 12 mm |
Effective anchoring depth (h ef) | 80 mm |
Nominal drill-bit diameter perforated sleeve (d 0) | 16 mm |
Effective anchoring depth perforated sleeve (h ef) | 85 mm |
Drill hole depth (h 0) | 90 mm |
Min./max. screw-in depth | 8-20 mm |
Required injection mortar | WIT-VM 250, WIT-UH 300, WIT-PE 1000 |
Approval | ETA-16/0757, ETA-17/0127, ETA-19/0542 |
Material | Stainless steel A4, 1.4401 |
Surface | Plain |
Last viewed
Thermoset cross handle with female thread With threaded bush
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain
Threaded fuse MIDI
Plastic multi-purpose Zebra Shark® anchor without collar
Machine screw tap, through hole Ruko nut tap DIN 357 HSS plain
Soldering tips set EP5
Hexagonal bolt with thread up to the head ISO 4017, steel, strength class 8.8, zinc-nickel-plated, black (ZNBHL)
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
Stretch X jacket
Hose connection with plug-in nipple Series 2000