Internal thread anchor W-VI-IG, A4 stainless steel for Allrounder WIT-VM 250, masonry with SH perforated sleeve, Concrete Multi WIT-UH 300 and Pure Epoxy WIT-PE 1000 injection systems
Female-thread anchor W-VI-IG/A4, sst A4
ANC-(W-VI-IG/A4)-A4-M8X100
Register now and access more than 125,000 products
The anchor rod is covered by the following approvals/assessments:
- Injection system ALLROUNDER WIT-VM 250, masonry: ETA-16/0757, ETA-20/0854
- Injection system WIT-Nordic, masonry: ETA-16/0757
- Injection system CONCRETE-MULTI WIT-UH 300, OPTION 1: ETA-17/0127
- Injection system PURE EPOXY WIT-PE 1000, OPTION 1: ETA-19/0542
Datasheets(X)
Can be used for the following injection systems:
- Injection system ALLROUNDER WIT-VM 250, masonry (SH) - solid brick and perforated brick, aerated concrete
- Injection system WIT-Nordic, masonry (SH) - solid brick and perforated brick, aerated concrete
- Injection system CONCRETE-MULTI WIT-UH 300, cracked and uncracked concrete
- Injection system PURE-EPOXY WIT-PE 1000, cracked and uncracked concrete
W-VI-IG/A4 (stainless steel A4) can be used in dry indoor areas, outdoors (including in industrial atmospheres and close to the sea) or in wet rooms, provided that no particularly aggressive conditions are present.
Type description | W-VI-IG/A4 |
Female thread | 8 mm |
Length | 100 mm |
Nominal drill-bit diameter (d 0) | 14 mm |
Effective anchoring depth (h ef) | 100 mm |
Drill hole depth (h 0) | 100 mm |
Min./max. screw-in depth | 8-20 mm |
Required injection mortar | WIT-VM 250, WIT-UH 300, WIT-PE 1000 |
Approval | ETA-16/0757, ETA-17/0127, ETA-19/0542 |
Material | Stainless steel A4, 1.4401 |
Surface | Plain |
Last viewed
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain
Countersunk head screw with recessed head, H DIN 965, A2 stainless steel, plain
Profile half cylinder EPS
Straight reducer fitting ISO 8434-1, stainless steel 1.4571
NP profile double cylinder In 6-pin system
Work polo shirt Spring 11362
Manual taper tap Ruko hand tap HSS DIN 2181 UNF taper tap
Cordless screwdriver AS 4
Countersunk screw with hexalobular head