Welcome to Würth Aerospace Solutions For trade customers only

JAMO® window frame screw for wood/concrete

Jamo wood/concrete steel zinc plated AW
SCR-CS-WO/CONC-AW30-(A3K)-6X80
JAMO

Art.-no. 023456380
EAN 4038898498599

Prices for customers after login
JAMO® window frame screw for wood/concrete

Art.-no. 023456380

Prices for customers after login
Quantity
PU
x 100 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

The screw for making changes to spacing of wooden substructures on wooden, stone or concrete surfaces.

Substrates:


Solid wood (coniferous wood, ash, beech, oak), laminated beams, cross laminated timber (CLT) timber veneer (coniferous wood or BauBuche), OSB, chipboard and in combination with dowels in stone or concrete.



Benefits:


Approved load-bearing spacing assembly screw in accordance with ETA 11/0190 with wobble-free placement characteristics and quick bite.



Head:


Countersunk head with underhead thread with AW® drive for wobble-free fit of the bit and very high power transmission.



Thread:


Asymmetrical partial thread with underhead thread with sharp threads for short screw-in times.



Plastic non-friction coating:


High-quality slide coating to reduce friction and for easy screwing in.



Tip:


Quick bite of the screw tip without milled tip components.

Notice

When selecting the screw length, keep in mind that the thread must be fully anchored into the surface.


The requirements of the European Technical Approval and the dowel approval must be observed. More information about load values can be found at: www.wuerth.de/assy

ETA-11/0190

Product information

Datasheets(X)

CAD data (available after login)

Certificates/ Documents

 | 

 | 

Application area

For making changes to spacing of wooden substructures on wooden, stone or concrete surfaces

Instructions
  • 1. For dowel application: Pre-bore wooden slat and substrate according to dowel diameter

  • 2. Clean dowel hole and insert

  • 3. Screw on wooden slat and countersink the JAMO screw

  • 4. Turn JAMO screw anti-clockwise until the wooden slat reaches the desired distance, turn back or adjust the distance. Head remains flush with the wooden slat

Nominal diameter (d)

6 mm

Length (l)

80 mm

Head type

Countersunk head

Head diameter (dh)

12.5 mm

Head height (k)

3.5 mm

Head details

Under head thread

Internal drive

AW30

Nominal diameter 2

9.9 mm

Thread type

Wood screw thread

Thread design

Partial thread with underhead thread for adjusting

Thread form

Single start thread

Thread length (lg)

50 mm

Core diameter

3.9 mm

Core diameter of head thread

7.4 mm

Shape of tip

Tip

Material

Hardened steel

Surface

Zinc plated

Suitable for use in the following materials

Wood
Derived timber product
Board ply wood (BSP)
Softwood
Dowel
Construction beech
OSB

Area of application

Spacing assembly
Adjusting
Substructure

Max. screw-in angle

90 Degree

Min. screw-in angle

0 Degree

Approval

Test report 50923397
ETA-11/0190

RoHS-compliant

Yes

Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
Bit box AW 9 pieces

BIT-AW-SORT-20/30/40-9PCS

Small, impact-resistant bit box made of plastic that fits in almost any pocket
x 1 pcs
Spirit level straight edge with bubbles

SREDG-LEVL-LM-BUBBLE-L180CM

From thick-walled light metal profile with middle web and two plastic end caps
x 1 pcs
Plastic multi-purpose Zebra Shark® anchor without collar

DWL-PLA-WO.COLLAR-8X51

ZEBRA-SHARK
Universal anchor for fixtures in almost all building materials (low load range)
Plastic multi-purpose ZEBRA Shark® anchor with collar

DWL-PLA-COLLAR-8X52

ZEBRA-SHARK
Universal anchor for fixtures in almost all building materials (low load range)
x 200 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information