JB-D window installation rail with screw-on plate

Name: JB-D window installation rail with screw-on plate
Brand: Würth
SKU: 047973363

JB-D mounting rail with mounting plate
MNTRL-JB-D150-10-40-AW75-AM8-(A2K)

Art.-no. 047973363

EAN 4050642857254

All versions

Specification

Galvanised steel for adjustable window installation in insulated wall structures.

Systematic, flexible, secure

The JB-D adjustable window installation system enables glazing to be installed systematically, in line with RAL guidelines and with safe transfer of all live loads. The system is adjustable in three dimensions to enable easy compensation of structural tolerances. It can be installed at any level and adjusted according to the isothermal profile.

Proof of Performance

The load capacity of brackets and rails has been determined by the manufacturer based on test report no. 10541805 from IfT Rosenheim. Individual calculations can be found in the guidelines on installing windows and house doors.

Notice

Please check the properties and conditions of all brackets and rails when using fasteners!

Load-bearing capacity must always be calculated using 2 brackets! Overview of the window mounting rail load-bearing capacity with compressive + tensile forces

Application area

Application

Application area

Solid sand-lime brick, aerated concrete, concrete and perforated brick masonry

For lateral attachment of windows to building structures

Instructions

The mounting rails can be mounted on the window frame profile in the pre-drilled blind or through holes (Ø 10.5 mm) either during window production or later on the building site. Once the windows have been positioned on the brackets and aligned, the mounting rails can be unscrewed until the sides are flush with the wall (masonry). Align the window vertically and secure it in place.