Jigsaw blade metal two stars For non-ferrous metals
Jigsaw blade 2S for non-ferrous base metal
JIGSAWBLDE-MET-5PCS-75/3
Register now and access more than 125,000 products
- Medium tooth pitch of 2.5 mm for straight cuts in material thicknesses of 3 to 10 mm
- For use with jigsaws compatible with T shank blades
- Further technical information can be found on the product packaging.
- For metal jigsaw blades, provide cooling, reduce the number of strokes and switch off oscillation.
- Cooling extends the service life of your jigsaw blades.
Datasheets(X)
Coolant
Drilling and cutting oil, turpentine, petroleum or a turpentine-petroleum mixture, water (caution: avoid all contact with electrical parts.)
Working length | 75 mm |
Teeth spacing | 2.5 mm |
Especially suitable for | Non-ferrous heavy metal |
Suitable for | Plexiglas |
Min./max. material thickness | 3-10 mm |
Number of pieces | 5 PCS |
Jigsaw-blade connection type | T shank |
Length | 100 mm |
Last viewed
Colour pin nail assortment 3100 pieces in system case 4.4.1.
Crossover bend, with solder connection and plug-in end EN1254, copper, 5086
T-piece, reduced with solder connection EN1254, copper, 5130R
Vacuum block disc Mirka
Logo sweat jacket
FLEXEN® universal bend With self-seal technology
Partial exoskeleton Ottobock CX Cool Sleeves cool sleeve arm
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
UV 50 sun protection spray
Low-cut safety shoe S2