Welcome to Würth Aerospace Solutions For trade customers only
Joist hanger 2.0 mm One piece - JOISTHNG-(INTCRANKED)-120X160X2,0 Joist hanger 2.0 mm One piece - JOISTHNG-(INTCRANKED)-120X160X2,0
Joist hanger 2.0 mm One piece - JOISTHNG-(INTCRANKED)-120X160X2,0 - 1
Joist hanger 2.0 mm One piece - JOISTHNG-(INTCRANKED)-120X160X2,0 - 2

Joist hanger 2.0 mm One piece

Joist hanger one-part, angled inwards
JOISTHNG-(INTCRANKED)-120X160X2,0

Art.-no. 0681110160
EAN 4011231560733
All versions

Prices for customers after login
Joist hanger 2.0 mm One piece

Art.-no. 0681110160

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

With inner wings for connecting beams to posts in visible areas. Suitable for wood/wood, wood/concrete or wood/steel connections
  • Beams under uniaxial load can be connected to posts of the same width

  • Wings angled inwards

  • Sheet metal hot-dip zinc-plated on both sides (S250GD +Z275), approx. 20 µm of thickness 2.0 mm in accordance with EN 10367:2004

  • Application in utilisation class 1 and 2 in line with EN 1995:2013
Proof of Performance

European Technical Approval ETA–09/0021

Notice

Nail edge clearances in the post must be observed in line with EC5 when designing connections with biaxial loads!


The diameter of bolts/screws may only be max. 2 mm smaller than the diameter of the hole.


The respective basic conditions of the applicable anchor approval must be observed.


Available work documents:


Load tables and detailed processing instructions can be found on the service page www.wuerth.de/holzverbinder.

European Technical Approval ETA–09/0021

Subject to technical changes!

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

Load-bearing connections of timber joists to wood, concrete or steel in visible areas

Instructions

Suitable fasteners:


  • Ribbed nail in line with EN 14592: 4.0 x 40 to 100 mm.

  • ASSY 3.0 Combi in line with ETA 11/0190: d = 10, 12 mm.

  • Bolts according to manufacturers' specifications: d = 10, 12 mm.

  • Recommended dowels for anchoring in concrete: W-BS; W-FAZ; W-VIZ; WIT-VM 250; WIT-UH 300

Width x height

120 x 160 mm

Thickness

2 mm

Number of D 5 mm holes in subcarrier nJ + main carrier nH

16 + 26 PCS

Number of D 13 mm holes in subcarrier nJ/main carrier nH

0 + 4 PCS

Weight

518 g

Depth of underside

80 mm

Material

Steel

Surface

Hot dip galvanized

Width of wing on nut

34 mm

Approval

ETA-09/0021

Material designation

S250GD

Material standard

DIN EN 10326:2004

Number of pieces

1 PCS

Depth of upper side

42 mm

Partial and complete nailing of Würth joist hanger 2.0 mm with internal wings
Characteristic load-bearing capacities of Würth joist hangers 2.0 mm; internal wings with Würth ASSY 3.0 joist hanger screws
Art. no.Format in mmComplete screw connectionPartial screw connection
Fz,down,RkFz,up,RkFy,RkFz,down,RkFz,up,RkFy,Rk
5x405x505x405x505x405x505x405x505x405x505x405x50
Parameters of Würth joist hanger 2.0 mm; internal wings according to ETA-08/0021
Art. no.Format w/h (mm)Width (mm)Height (mm)Complete nailingPartial nailing
nHnJkH,1kH,2e1e2nHnJkH,1kH,2e1e2
[pcs][pcs] mmmm[pcs][pcs] mmmm
Factor table for rated values
NKLcontinuouslongmediumshortshort/very shortvery short
Characteristic load-bearing capacities of Würth joist hangers 2.0 mm; internal wings with Würth comb/anchor nails
Art. no.Format in mmComplete nailingPartial nailing
Fz,down,RkFz,up,RkFy,RkFz,down,RkFz,up,RkFy,Rk
4x404x604x404x604x404x604x404x604x404x604x404x60
0681 089 12080/12025,628,021,323,412,113,916,218,712,814,07,38,3
0681 109 140100/14029,932,725,628,015,317,717,118,712,814,08,39,7
0681 110 160120/16038,442,134,137,419,722,721,323,417,118,710,612,3
0681 110 180140/18042,746,738,442,122,926,425,628,021,323,412,714,7
0681 089 12080/12080120181025,913,553183910611,910,0397627
0681 109 140100/140100140221234,819,7864112212619,511,3636826
0681 110 160120/160120160261647,529,72079197314822,120,013951324
0681 110 180140/180140180301859,839,218792248161032,621,612621510
10,4620,5380,6150,6920,7690,846
20,4620,5380,6150,6920,7690,846
0681 089 12080/12016,024,59,415,26,29,57,812,16,710,63,75,7
0681 109 140100/14021,030,113,521.497,611,711,717,27,712,23,96,1
0681 110 160120/16027,338,719,530,510,015,313,420,112,517,25,28,0
0681 110 180140/18033,142,925,038,511,417,517,925,813,721,06,39,7
Notes:
• Design according to ETA-09/0021 and DIN EN 1995-1-1
• The regulations and instructions of ETA-09/0021 must be observed
• The transverse tension must be verified separately
• The main beam must be secured to prevent torsion

These are guides for planning purposes. The values must be calculated for each project by authorised persons.
In the case of connections to main supports, all holes in the main support plate must be provided with screws or anchor nails; in the case of connections with partial nailing, only the holes marked in red.
Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
ASSY<SUP>®</SUP> 3.0 combination timber screw
ASSY® 3.0 combination timber screw

SCR-WO-HEX-AW40-(A3K)-12X140/80

ASSY 3.0 KOMBI
For powerful steel/wood and wood/wood screw connections with U washers, in particular for the timber construction and carpentry sector.
x 50 pcs
ASSY<SUP>®</SUP> 3.0 combination timber screw
ASSY® 3.0 combination timber screw

SCR-WO-HEX-AW40-(A3K)-12X160/100

ASSY 3.0 KOMBI
For powerful steel/wood and wood/wood screw connections with U washers, in particular for the timber construction and carpentry sector.
x 50 pcs
Comb nail / anchor nail
Comb nail / anchor nail

RIDGNL-(A3K)-4X40MM

Galvanised steel, blue coated (A2K)
x 3000 pcs
Comb nail / anchor nail
Comb nail / anchor nail

RIDGNL-(A3K)-4X50MM

Galvanised steel, blue coated (A2K)
Comb nail / anchor nail
Comb nail / anchor nail

RIDGNL-(A3K)-4X60MM

Galvanised steel, blue coated (A2K)
Comb nail / anchor nail
Comb nail / anchor nail

RIDGNL-(A3K)-4X75MM

Galvanised steel, blue coated (A2K)
x 250 pcs
Fixanchor W-FAZ/S
Fixanchor W-FAZ/S

ANC-(W-FAZ/S)-(A2K)-125-M12X220

Bolt anchor for high loads in cracked and non-cracked concrete. Steel, zinc-plated
x 25 pcs
Fixanchor W-FAZ/S
Fixanchor W-FAZ/S

ANC-(W-FAZ/S)-(A2K)-145-M12X240

Bolt anchor for high loads in cracked and non-cracked concrete. Steel, zinc-plated
x 20 pcs
Fixanchor W-FAZ/S
Fixanchor W-FAZ/S

ANC-(W-FAZ/S)-(A2K)-160-M12X255

Bolt anchor for high loads in cracked and non-cracked concrete. Steel, zinc-plated
x 20 pcs
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)

ANC-(W-VIZ-A/S)-(A2K)-10-M12X110

x 10 pcs
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)

ANC-(W-VIZ-A/S)-(A2K)-25-M12X125

x 10 pcs
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)

ANC-(W-VIZ-A/S)-(A2K)-50-M12X150

x 10 pcs
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)

ANC-(W-VIZ-A/S)-(A2K)-100-M12X200

x 10 pcs
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)

ANC-(W-VIZ-A/S)-(A2K)-125-M12X225

x 10 pcs
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)

ANC-(W-VIZ-A/S)-(A2K)-165-M12X265

x 10 pcs
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)

ANC-(W-VIZ-A/S)-(A2K)-25-M12X115

x 10 pcs
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)

ANC-(W-VIZ-A/S)-(A2K)-25-M12X140

x 10 pcs
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)

ANC-(W-VIZ-A/S)-(A2K)-25-M12X145

x 10 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details