KL locking device
KL locking device steel phosphated
LOKDEV-KL-ESN09-(PHR)-D10,0MM
Register now and access more than 125,000 products
- Locking device for shaft ends and spacers that can be installed and uninstalled radially without tools
- Plate-shaped design for rattle-free, tolerance-compensating fit
- High axial load capacity
Datasheets(X)
CAD data (available after login)
 | |
Suitable for min./max. shafts (d3) | 10-12 mm |
Suitable for groove diameter (d4) | 8 mm |
Suitable for groove width (m1) | 0.9 mm |
Internal diameter (d1) | 7.5 mm |
Outer diameter (d2) | 16 mm |
Material | Steel |
Surface | Phosphated |
Form | ESN09 |
Last viewed
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Lunch bag
Hexagonal bolt with shank
Single-pole voltage tester
Work coat
Slotted set screw with tip ISO 7434, steel 14H, zinc-plated, blue passivated (A2K)
Safety boots, S3
Snap hook, metal
OrgaAer partial extension
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)