KL locking device
KL locking device steel phosphated
LOKDEV-KL-ESN09-(PHR)-D16,0MM
Register now and access more than 125,000 products
- Locking device for shaft ends and spacers that can be installed and uninstalled radially without tools
- Plate-shaped design for rattle-free, tolerance-compensating fit
- High axial load capacity
 | |
Suitable for min./max. shafts (d3) | 16-20 mm |
Suitable for groove diameter (d4) | 12 mm |
Suitable for groove width (m1) | 1.1 mm |
Internal diameter (d1) | 11 mm |
Outer diameter (d2) | 22.6 mm |
Material | Steel |
Surface | Phosphated |
Form | ESN09 |
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Last viewed
Work dungarees
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
Hexagonal bolt, with thread to head and fine thread
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Coloured rubber grommets made from polychloroprene rubber Insulating grommets, coloured, CR
Key rosette pair AL 30
Reserve taper grooved dowel pins ISO 8741 steel zinc-plated
Bi-puller For wiggle wire
Flat head tapping screw, type C with hexagon socket ISO 14585, A2 stainless steel, shape C (with tip)
Steel enclosed tape measure With 3:1 crank ratio for retracting the tape three times faster
