KPF edge sanding belt, individual
Edge sanding belt wood and veneer, individual finishing
SNDBL-EDG-KPF-P180-B150MM
ZEBRA
Register now and access more than 125,000 products
Minimal clogging thanks to the anti-static finish
Results in extremely long service life.
F-paper, half-open scattering with anti-static finish
- Extremely high load-bearing capacity of sanding belts (e.g. calibration)
- Prevents the sanding belt from clogging up too soon
- Optimum grinding finish
- Low impact from grinding dust (fine dust)
The belts should be stored in dry, frost-free rooms. Do not store near heaters, cold or damp walls, doors or windows or directly on the floor. Storage temperatures between 18°C and 22°C at a relative humidity between 45% and 65% are recommended. Protect belts from exposure to direct sunlight. If possible, store sanding belts in the original packaging until used. Store sanding belts that have been removed from packaging in such a way that deformation is prevented.
Datasheets(X)
For edge sanding machines
Calibration, sanding of cabinet fronts and side panels (veneered), sanding of frame components for solid wood cupboards. Especially suitable for veneers, solid wood (hardwood, softwood, cross-grained wood, resinous woods) and wood materials.
Grid size | P180 |
Backing material | F-weight paper |
Material of abrasive medium | Aluminium oxide |
Last viewed
Square washer DIN 436, zinc-plated steel, blue passivated (A2K)
AL 900 door handle on outer plate With cylinder cover
Hexagon Socket Head Cap Screw full thread ISO 4762/DIN 912, steel 12.9, plain, with full thread
AS S3 Winter safety boots
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
EPS profile double cylinder
R28 plastic roller
Safety boots, S4
Clamping pin/clamping sleeve ISO 13337 spring steel plain
Spiral clamping pin, standard design ISO 8750 steel plain