KPF edge sanding belt, individual
Edge sanding belt wood and veneer, individual finishing
SNDBL-EDG-KPF-P60-B300MM
ZEBRA
Register now and access more than 125,000 products
Minimal clogging thanks to the anti-static finish
Results in extremely long service life.
F-paper, half-open scattering with anti-static finish
- Extremely high load-bearing capacity of sanding belts (e.g. calibration)
- Prevents the sanding belt from clogging up too soon
- Optimum grinding finish
- Low impact from grinding dust (fine dust)
The belts should be stored in dry, frost-free rooms. Do not store near heaters, cold or damp walls, doors or windows or directly on the floor. Storage temperatures between 18°C and 22°C at a relative humidity between 45% and 65% are recommended. Protect belts from exposure to direct sunlight. If possible, store sanding belts in the original packaging until used. Store sanding belts that have been removed from packaging in such a way that deformation is prevented.
Datasheets(X)
For edge sanding machines
Calibration, sanding of cabinet fronts and side panels (veneered), sanding of frame components for solid wood cupboards. Especially suitable for veneers, solid wood (hardwood, softwood, cross-grained wood, resinous woods) and wood materials.
Grid size | P60 |
Backing material | F-weight paper |
Material of abrasive medium | Aluminium oxide |
Last viewed
Cut-resistant gloves Ansell HyFlex 11-738
Stud with threaded end ≈ 1.25 d DIN 939, A2 stainless steel, plain
Hexagonal bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
ADD Box organiser box
Cable clamp, single-lobed according to SN 78550
Plug-in torque wrench head Stahlwille 7370/40-1 plug-in adapter
3/8" socket wrench insert metric, hexagon, short
RW® bit
Cross-hole countersink assortment Ruko 102312RO conical and countersink deburring tool set with cross hole 90° HSS, 4 pieces