KPF long sanding belt, individual

Name: KPF long sanding belt, individual
Brand: Würth
SKU: 0583412010

Long sanding belt,wood and veneer indiv. finishing
SNDBL-LNG-KPF-P120-B100MM
ZEBRA

Art.-no. 0583412010

EAN 4047376285989

All versions

Specification

The long sanding belt is available in various dimensions and can be tailored to your requirements. Simply ask your Würth sales representative.

Minimal clogging thanks to the anti-static equipment.

This results in an extremely long service life

F-paper, half-open scattering with anti-static finish

Extremely high load-bearing capacity of sanding belts (e.g. calibration)

Prevents the sanding belt from clogging up too soon

Optimum grinding finish

Low impact from grinding dust (fine dust)

Notice

The belts should be stored in dry, frost-free rooms. Do not store near heaters, cold or damp walls, doors or windows or directly on the floor. Storage temperatures between 18°C and 22°C at a relative humidity between 45% and 65% are recommended. Protect belts from exposure to direct sunlight. If possible, store sanding belts in the original packaging until used. Store sanding belts that have been removed from packaging in such a way that deformation is prevented.

Application

Application area

For long belt machines

Calibration, sanding of cabinet fronts and side panels (veneered), sanding of frame components for solid wood cupboards. Especially suitable for veneers, solid wood (hardwood, softwood, cross-grained wood, resinous woods) and wood materials.