Knife blade, straight, long
Cutting knife straight, long
CUTKNFE-WNDWREP-SR-L70MM
Register now and access more than 125,000 products
Conversion of Fein part numbers to Würth part numbers.
The three digits after 639 03 ... in original Fein numbers are crucial, or the three-digit number punched into the knives.
If the number begins with 0, e.g. 095, the 0 is replaced with a 5 and the result is given the prefix 0696. In this instance, for example, the Würth item no. would be 0696 595.
If the number begins with 1 or 2, e.g. 126, a 5 is inserted before the 1 or 2 and the result is given the prefix 0696. In this instance, for example, the Würth art. no. would be 0696 512 6.
Datasheets(X)
Cutting edge length | 70 mm |
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Hexagonal bolt with shank, SB FITTINGS, DIN EN 15048-1 DIN 7990, steel 4.6, hot-dip galvanised (hdg)
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Die For standard metric ISO thread HSCo Multi Performance
Ring bolt H.Q.E. with variable screw length
Double cylinder S5 locking system
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated (A2K)
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Hexagonal bolt with thread up to the head