Knife blade, straight, long, with stop roller
Cutting knife straight long with stop roller
CUTKNFE-WNDWREP-SR-ROLL-L58MM
Register now and access more than 125,000 products
Conversion of Fein item numbers to Würth item numbers.
The three digits after 639 03 ... in original Fein numbers are crucial, or the three-digit number punched into the knives.
If the number begins with 0, e.g. 095, the 0 is replaced with a 5 and the result is given the prefix 0696. In this instance, for example, the Würth item no. would be 0696 595.
If the number begins with 1 or 2, e.g. 126, a 5 is inserted before the 1 or 2 and the result is given the prefix 0696. In this instance, for example, the Würth item no. would be 0696 512 6.
Datasheets(X)
Cutting edge length | 58 mm |
Last viewed
O-ring, metric
Setting tool For body-bound rivets
Basic jacket
Order protector with rip-tape fastening
Hexagonal bolt with thread up to the head DIN 933, A4 80 stainless steel, plain
VDE replacement blade
Tool holder For thermic drill bit
Slide shoe For door closer with slide rail
Wire cable barrel terminal with right-handed thread
1/2 inch power cardan joint With 1/2 inch square drive and ball lock