L-shaped floor marking
FLRMRK-(L-SHAPE)-WHITE
Art.-no. 0812449114
EAN 4062856710232
Register now and access more than 125,000 products
Navigation and standards compliance
- Clear navigation in accordance with ASR A1.3.
- Meets the requirements of DIN EN ISO 7010.
- Clear edges aid navigation at the workplace and unambiguously define areas and paths in storage, logistics and production.
- Combines well with other types of floor marking from our range.
Shape and durability
- Rounded shape for high visibility and long-term use.
- Withstands light to moderate traffic and reduces the number of replacement cycles.
PVC marking with acrylate adhesive
- Extremely durable for daily use.
- Robust and highly resistant to tearing.
- High abrasion resistance for resilience over long-term use.
- Easy to clean.
Easy installation
- Self-adhesive reverse for quick adhesion to clean substrates.
- Easy to apply, can be walked on immediately.
- Simple and time-saving to apply.
Broad substrate compatibility
- Can be used in production, storage and sales areas or at workstations.
- Can be walked on by pedestrians and driven over by pallet trucks.
- For smooth indoor surfaces.
- Can be used on smooth concrete screed, EP/PU/MMA coatings and tiles.
This type of floor marking must not be subjected to high mechanical loads, in particular from heavy industrial trucks, turning or pivoting manoeuvres on the marking, or from dragging or pushing pallets across the marked area.
The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result.
Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.
Datasheets(X)
The L-shaped floor marking is suitable for precisely marking edges and corners, for indicating the location of pallet storage, shelving areas, containers and trolleys as well as for delimiting zones and marking routes in production, warehousing, picking and shipping.
Targeted storage space marking reduces search times and minimises picking errors, while the high-visibility colouring makes storage locations easier to see, thereby supporting safety and process reliability in intralogistics.
On smooth indoor floors, the marking is designed for pedestrian areas and rolling transport equipment such as pallet trucks, roll containers and tugger trains under light to medium loads.
Multiple colour options and good visibility allow a standardised marking system for 5S and lean management; the symbol can also be ideally combined with other floor marking types.
For optimal adhesion, the surface must be clean, dry and free from release agents such as grease, oil, surfactants, dirt and dust. The use of butyl primer is also recommended on certain surfaces, particularly concrete and asphalt.
When peeling, do not touch the adhesive area and try to remove the protective film in one piece. Immediately position and stick the marking in place. Press firmly. We recommend a press-on roller for a particularly uniform finish.
Avoid air pockets and ensure correct positioning, as it will not be possible to remove again due to the high adhesive force. The L-shape can be driven over or walked on immediately after application.
Adhesive base | Acrylate |
Material | PVC - Polyvinyl chloride |
Length | 100 mm |
Width | 100 mm |
Thickness | 0.5 mm |
Colour | White |
Form | L |
Gloss level | Matt |
Suitable for use in the following materials | Smooth and crevice free |
Area of application | Indoors |
Min./max. temperature conditions | -20 to 70 °C |
Min./max. processing temperature | 12 to 40 °C |
Shelf life from production/conditions | Unlimited / cool and dry storage area, no exposure to sunlight, 15°C to 25°C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Cover cap for profile rail
Pipe cutters for Universal and Solar corrugated stainless steel pipes
Oblique end cutters
LED digital thermometer with contact sensor
Removal adapter set R134a For 12 kg R134a reusable refrigerant bottles
ASME B18.16.6 steel GR.N8 zinc-plated
Flat washer without chamfer ISO 7089 steel 200 HV, zinc-plated, blue passivated (A2K)
CUT+COOL Perfect drilling and cutting oil
Hexagon nut DIN 934, A4 stainless steel, plain
2C liquid metal filler FLM 50