L-shaped push-in fitting, long version
L-shaped push-in fitting long version M/G thread
PSHINFITT-L-ROT-LG-PLA-ET-G1/2-PIP-16
Register now and access more than 125,000 products
Datasheets(X)
- Compressed air systems
- Automation technology
- Automotive industry
- Packaging industry
 | |
Material | Plastic / metal |
Material of gasket | Nitrile butadiene rubber (NBR) |
Material of screwing thread | Brass |
Surface of the screwing thread | Nickel plated |
Design | Long version |
Form | 90° offset |
Drive type | Outer hexagon |
Min./max. working pressure | -0.95-10 bar |
Min./max. operating temperature | -20 to 80 °C |
Thread type x nominal diameter (d1) | G1/2 |
Suitable for hose external diameter (Fs) | 16 mm |
Length (l1) | 54.9 mm |
Thread length (lg) | 9.0 mm |
Length 2 (l2) | 33.5 mm |
Width across flats (s1) | 24 mm |
Last viewed
Work trousers
Slotted flat-head screws with shoulder Shape B - with undercut
Low-cut safety shoes, S2
Handle
Thread repair single set TIME-SERT® 14 pieces
Handle plate TYPE E
Adapter A2 With centre drill bit
Lever riveter HNG 26 N
Accessories for identification rings
Coloured rubber grommets made from polychloroprene rubber Insulating grommets, coloured, CR