L-shaped push-in fitting, long version
L-shaped push-in fitting long version M/G thread
PSHINFITT-L-ROT-LG-PLA-ET-G1/4-PIP-6
Register now and access more than 125,000 products
Datasheets(X)
- Compressed air systems
- Automation technology
- Automotive industry
- Packaging industry
 | |
Material | Plastic / metal |
Material of gasket | Nitrile butadiene rubber (NBR) |
Material of screwing thread | Brass |
Surface of the screwing thread | Nickel plated |
Design | Long version |
Form | 90° offset |
Drive type | Outer hexagon |
Min./max. working pressure | -0.95-10 bar |
Min./max. operating temperature | -20 to 80 °C |
Thread type x nominal diameter (d1) | G1/4 |
Suitable for hose external diameter (Fs) | 6 mm |
Length (l1) | 31.5 mm |
Thread length (lg) | 6.5 mm |
Length 2 (l2) | 20.0 mm |
Width across flats (s1) | 17 mm |
Last viewed
L-shaped push-in fitting, long version
90° angled male fitting ISO 8434-1, zinc-nickel-plated steel, tapered BSPT male thread
Threaded rod DIN 976, A2-70 stainless steel, shape A
Threaded rod DIN 976, steel 8.8, plain, shape A
Twist drill bit HSCo DIN 338 type RN bronze point thinning
O-ring, metric
Crescent ring Steel, plain
Divider assortment With compartment rails and compartment dividers for system dimensions 12.8
Straight male fitting ISO 8434-1, stainless steel 1.4571, metric male thread with seal
Low-cut safety shoe S2