L-shaped push-in fitting with female thread
L-shaped push-in fitting female thread
PSHINFITT-L-ROT-PLA-IT-G1/4-PIP-10
Register now and access more than 125,000 products
Datasheets(X)
- Compressed air systems
- Automation technology
- Automotive industry
- Packaging industry
 | |
Material | Plastic / metal |
Material of gasket | Nitrile butadiene rubber (NBR) |
Material of screwing thread | Brass |
Surface of the screwing thread | Nickel plated |
Design | With female thread |
Form | 90° offset |
Drive type | Outer hexagon |
Min./max. working pressure | -0.95-10 bar |
Min./max. operating temperature | -20 to 80 °C |
Thread type x nominal diameter (d1) | G1/4 |
Suitable for hose external diameter (Fs) | 10 mm |
Length (l1) | 34.3 mm |
Thread length (lg) | 10 mm |
Length 2 (l2) | 27.2 mm |
Width across flats (s1) | 17 mm |
Last viewed
Aluminium tool case Not equipped
Emergency station for eyes
Hexagonal bolt with thread up to the head DIN 933, brass, plain
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Door handle A 803 on oval escutcheon
TIPP® Priopress pipe clamp with joint
Insect remover
Cable grommet with perforated membrane CR
Interior trim clip, type 3
Tile recess for super-flat shower channels