L-shaped push-in fitting with male and female thread
L-shaped push-in fitting male/female M/G thread
PSHINFITT-L-ROT-PLA-ET/IT-G1/4-PIP-6
Register now and access more than 125,000 products
Datasheets(X)
- Compressed air systems
- Automation technology
- Automotive industry
- Packaging industry
 | |
Material | Plastic / metal |
Material of gasket | Nitrile butadiene rubber (NBR) |
Material of screwing thread | Brass |
Surface of the screwing thread | Nickel plated |
Design | 360° rotatable |
Form | 90° offset |
Drive type | Outer hexagon |
Min./max. working pressure | -0.95-10 bar |
Min./max. operating temperature | -20 to 80 °C |
Thread type x nominal diameter (d1) | G1/4 |
Thread type 2 x nominal diameter 2 (d2) | G1/4 |
Suitable for hose external diameter (Fs) | 6 mm |
Length (l1) | 24.9 mm |
Thread length (lg) | 6.3 mm |
Thread length 2 (lg2) | 12.0 mm |
Outer diameter (d2) | 18.3 mm |
Length 2 (l2) | 34.0 mm |
Width across flats (s1) | 17 mm |
Last viewed
Rechargeable battery for cordless concrete vibrator
Order protector with rip-tape and hinge
EPS profile thumbturn cylinder
WÜPLAST® pan head screw with flange and Z Phillips head WN 1411, steel 10.9, zinc-plated, transparent passivated (A3K)
Hexagonal bolt
Hexagonal bolt
Grooved taper-pin ISO 8744 A1 stainless steel plain
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
Hammer head bolt with square neck DIN 186, A4 stainless steel, plain
Twist drill bit HSCo DIN 338 type RN bronze point thinning