L-shaped push-in fitting with male and female thread
L-shaped push-in fitting male/female R thread
PSHINFITT-L-ROT-PLA-ET/IT-R1/4-PIP-12
Register now and access more than 125,000 products
Datasheets(X)
- Compressed air systems
- Automation technology
- Automotive industry
- Packaging industry
 | |
Material | Plastic / metal |
Material of gasket | Nitrile butadiene rubber (NBR) |
Material of screwing thread | Brass |
Surface of the screwing thread | Nickel plated |
Design | 360° rotatable |
Form | 90° offset |
Drive type | Outer hexagon |
Min./max. working pressure | -0.95-10 bar |
Min./max. operating temperature | -20 to 80 °C |
Thread type x nominal diameter (d1) | R1/4 |
Thread type 2 x nominal diameter 2 (d2) | G1/4 |
Suitable for hose external diameter (Fs) | 12 mm |
Length (l1) | 34.3 mm |
Thread length (lg) | 9.5 mm |
Thread length 2 (lg2) | 11.0 mm |
Length 2 (l2) | 33.5 mm |
Length 3 (l3) | 22.3 mm |
Width across flats (s1) | 17 mm |
Last viewed
Low-cut safety shoes, S1P
Roofing screw pias® A2 stainless steel
Safety boots, S3
Cable grommet with perforated membrane CR
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Split pin ISO 1234 A2 stainless steel
Stud with threaded end ≈ 2d
Y-connector, PA6 MOD BS SGA
Sealing plug W.TEC® COVER CAP WP 300 F Polyethylene, natural
EPS profile double cylinder