Welcome to Würth Aerospace Solutions For trade customers only

LDPE fold masker

Cover film UV fold masker
COVFLM-ADHSTR-UV-60CMX15M
ZEBRA

Art.-no. 0992416060
EAN 4024835871617

Prices for customers after login
LDPE fold masker

Art.-no. 0992416060

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

High tear-resistant, pre-folded cover film with UV-resistant PE-coated fabric cover tape for indoor and outdoor applications.

UV-resistant


Can be removed residue-free within up to three weeks.



  • Long-term fabric adhesive with thick natural rubber adhesive

  • Good water and solvent resistance

  • Bonding also possible on slightly soiled or slightly structured surfaces
Notice
  • Adhesive edge not suitable for use on glass e.g. tinted glass/self-tint glass).

  • Certain plastic surfaces (certain types of PVC) and cellulose nitrate varnishes and precious metals may cause residues. In these cases a test application for 48 hours is recommended. Not suitable for porous or absorbent surfaces, e.g. porous natural stone, marble, granite, concrete and untreated wood. Discolouration may occur on these surfaces.

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

The time-saving and compact 2-in-1 system can be used for temporary protection of many surfaces during spray painting, plaster and façade cleaning. The product also offers a time-saving alternative to conventional, full-surface adhesive protective films when it comes to window protection in the indoor and outdoor areas

Instructions

Substrate must be dry and free from grease and dust.


Unroll, affix the adhesive tape, cut, unfold the film

Adhesive tape backing material

PE-coated fabric

Foil backing material

Polyethylene

Adhesive base

Natural rubber

Colour

Blue (base material)
Transparent (film material)

Length of roll

15 m

Width (opened out)

60 cm

Foil thickness

0.05 mm

Thickness of adhesive tape

0.31 mm

Elongation at break

10 %

Dynamic peel strength at 25 mm

9.5 N

Min./max. processing temperature

5 to 40 °C

Max. temperature resistance

50 °C

Moisture resistance

Yes

Ultraviolet resistance

Yes

Resistance against

Weather

Max. usage duration

3 Weeks

Shelf life from production/conditions

12 Month / at 20°C and 50% humidity

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information