Light sheet metal rail Aluminium (EN-AW-6063 T6)
Sheet metal rail Light
SHTMETRL-SOL-ALU-TRAPEZE-25X80X3150MM
ZEBRA
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
For mounting directly on the trapezoidal sheet
Notice
- Not suitable for flat roof elevation mounting
- It should be ensured in advance that the sheet metal is sufficiently attached to the substructure. The maximum load-bearing capacity of the sheet metal should also be checked. Approval must be obtained from the manufacturer, particularly in the case of sandwich roofing elements. We recommend using ZEBRA® DBS® 4.5 x 25 thin sheet metal screws with sealing washer for attachment. The sheet metal rail must be pre-drilled with Ø 5.0 mm holes.
Product information
Datasheets(X)
Length | 3150 mm |
Height | 25 mm |
Width | 80 mm |
Material | Aluminium |