Line marker Starter set, 13 pieces
LINE MARKER - STARTER SET
Art.-no. 0988083454
EAN 4068362453625
Register now and access more than 125,000 products
Abrasion-resistant
Offers long-term resistance against wear from vehicles.
Weather resistance
Resistant to a range of climatic conditions.
Broad bonding range
Good adhesion to absorbent and non-absorbent surfaces.
Short drying time
Can be driven over after approx. 15-20 minutes. Completely dry after 24 hours.
Economical
One can allows approx. 25-50 m of road surface marking (depending on the line width).
Easy handling
Specially designed protective cap with integrated spray head.
The shelf life is 2 years
The protective cap can be secured against unwanted spraying by turning. Fresh soiling can be removed with thinner. Hardened marking paint can be removed with a high-pressure cleaner and a brush. The shelf life is two years. The surface must be dry and free from dust and grease. Cannot be used on other paints or paint residues.
The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result. Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.
Datasheets(X)
For marking parking spaces, storage areas, construction sites and public facilities
Can be used on substrates such as tarmac, concrete, wood, stone, metal and many plastics (perform your own tests)
Apply to the substrate holding the can upside down
Only apply to dry substrates
Line markings are made by manually pressing on the attached protective cap with the integrated nozzle head or, when used in the line-marking cart, by attaching the spray head, art. no. 0891199.
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
Last viewed
Slotted screwdriver with hexagon shank
Standard cable connecting socket
A 505 Click door handle
Screwdriver slotted 3C handle with hexagon shank
Ice scraper in display box
Carriage with plastic-coated ball bearing roller
Flat cover cap, for hexalobular socket and AW drive
Handle
Replacement foot for aluminium ladders
PZ laser tip screwdriver with hexagon shank