Welcome to Würth Aerospace Solutions For trade customers only

Lining tape

Lining tape
GLAZMNTTPE-SA-GREY-12X5MM-10M

Art.-no. 087571205
EAN 4011231802048
Prices for customers after login
Lining tape

Art.-no. 087571205

Prices for customers after login
Quantity
PU
x 100 m

Exclusively for trade customers

Register now and access more than 125,000 products

For glazing of windows, doors and fixed glazing
  • Compressible

  • Prevents three-point adhesion

  • Self-adhesive

  • Fills glazing rebates and reduces sealant consumption

  • Acts as motion-damping section under heavy wind loads

  • Very fine, uniform, completely closed cell structure

  • Decorative, smooth surface

  • Highly elastic

  • High mechanical values with low volume weight

  • Excellent chemical resistance

  • Highly resistant to weathering

  • Excellent thermal insulation values

  • Shelf life: 12 months if stored in a cool, dry place

  • Outstanding UV resistance

  • Compatible with acrylic glass
Notice

Without cover film

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Instructions
  • The processing temperature should not be below +5°C.

  • The surface must be dry and free from dust, oil and grease.

  • The lining tape should be used in connection with an edge sealant.

Chemical basis

Closed-cell polyethylene foam

Colour

Grey

Overall thickness

5 mm

Min. tensile strength

0.325 N/mm²

Min. transverse tensile strength

0.220 N/mm²

Conditions for tensile strength

in accordance with ISO 1926

Moulded density

29 kg/m³

Compression force deflection

98 kPa

Compression force deflection conditions

in accordance with ISO 844, 50% deformation

Min. breaking elongation

125 %

Min. diagonal breaking elongation

115 %

Water-vapour permeability

0.72 g/m²/d

Conditions for water-vapour permeability

in accordance with ISO 1663, specimen thickness 5 mm

Heat conductance λ

0.034 W/(m*K)

Heat conductance λ conditions

at 0°C, in accordance with ISO 2581

Width

12 mm

Building material class

B3 - Of high flammability

Building material class conditions

in accordance with DIN 4102

Ultraviolet resistance

Yes

Min. processing temperature

5 °C

Max. processing temperature

25 °C

Min. temperature resistance

-30 °C

Max. temperature resistance

80 °C

Shelf life from production

12 Month

Conditions to maintain shelf life from production

cool and dry storage area

Length of roll

10 m

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information