Liquid foil CERAfix<SUP>®</SUP> 302 - LIQUIDFILM-(CERAFIX-302)-20KG-GREY

Liquid foil CERAfix^® 302

Name: Liquid foil CERAfix ® 302
Brand: Würth
SKU: 5875100302

Liquid foil CERAfix 302
LIQUIDFILM-(CERAFIX-302)-20KG-GREY
CERAFIX

Art.-no. 5875100302

EAN 4048539346516

All versions

Specification

Watertight, elastic, polymer dispersion-based sealing compound for sealing in a compound structure (AIV-F) for water impact classes W0-I and W1-I in floor applications and W2-I in wall applications according to DIN 18534

Certified quality

General test certificate from construction authorities

Classification of fire behaviour in accordance with DIN EN 13501-1 and EN ISO 11925-2

Ready to use

Can be used directly from the container

No mixing required

Fast application

Particularly high degree of flexibility

Very suitable for bridging cracks

Secure even on surfaces subject to cracking and considerable movement

Short drying time

Quick to build up layers, e.g. with subsequent sealing and laying work

Reduces downtimes

Water vapour permeable

Ideal for slightly damp surfaces

Solvent-free

Can be painted, rolled or filled

Our products featuring the EMICODE label are low emission/environmentally compatible. The EMICODE classification system awards labels to construction products that comply with the very stringent health and environmental requirements of recognised institutes.

Proof of Performance

EMICODE EC1plus: Very low emission – the EMICODE classification system characterises the environmental and health compatibility of construction products. The lowest-emission products bear the EC1plus mark.

Notice

Do not allow water to make contact with surface until fully hardened! Not suitable for underwater applications.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. For further information, please refer to the technical data sheet.

Application

Application area

For quick, seamless sealing under tiles and panels in indoor applications, e.g. in bathrooms, showers, living areas. CERAfix 302 is suitable for sealing in a compound structure for water impact classes W0-I, W1-I as per ZDB leaflet "Verbundabdichtungen" (compound sealing) and on wall surfaces for water impact class W2-I according to DIN 18534 Part3.

Prime substrates according to their requirements.

Available in two different colours for work supervision. Liquid seals must always be applied in two layers.

Instructions

The surface must be solid, load-bearing, clean, dry and free from separating substances. The material is applied with a brush or a roller. Before application, prime the surface with CERAfix 101, art. no. 5875100101. Apply an even layer of CERAfix 302 once the primer has dried. Reinforce the elastic surface seal by applying Würth CERAfix 310, art. no. 5875100310, in the wall/floor joint area. The tiles can be adhered directly to the CERAfix 302 once fully dried.

Technical information

Chemical basis	Polymer dispersion with fillers
Min. processing temperature	5 °C
Max. processing temperature	30 °C
Min./max. processing temperature /conditions	5 to 30 °C / at 20°C and 65% relative humidity
Min./max. processing temperature	5 to 30 °C
May be walked on after max.	1 d
May be walked on in following conditions	at 20°C and 65% relative humidity
Full resilience	7 d
Conditions for full resilience	at 20°C and 65% relative humidity
Can be covered after max.	1 d
Covering conditions	at 20°C and 65% relative humidity
Can be covered after (wall)	6 h
Application quantity in weight/area	1.2 kg/m²
Min. coating thickness	0.5 mm
Processing time	60 min
Application conditions	at 20°C and 65% relative humidity
Solvent-free	Yes
Full load capacity/conditions	7 d / at 20°C and 65% relative humidity

Documents

Product information

Datasheets (1)

Safety data sheet

Certificates/ Documents (0)

Accessory

Required accessory:

Product

Description

Quantity

Price
/PU

Tile dispersion primer CERAfix<SUP>®</SUP> 101

Tile dispersion primer CERAfix® 101

PRIM-(CERAFIX-101)-10LTR

CERAFIX

Art.-no. 5875100101

Solvent-free, ready-to-use, dispersion-based universal primer for indoor and outdoor use

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).